4" x 87 Innoflue SW Zero Radius Elbow

Description

Overview:
This elbow Zero Radius allows to make a 90-degree turn when installing 4" Innoflue SW (Single Wall) vent pipe and fittings. UV-rated (can be used indoors and outdoors).
Note: IANS04 (4") connector ring is required on all 4" Innoflue SW connections and is sold separately. IACE50 Centrocerin lubricant recommended for all gasketed connections.
Features:
Innoflue SW (Single Wall) is the only polymer vent system on the market listed to UL 1738
Zero radius elbows feature a longer socket to maintain 1/4“/ft pitch
Accepted and approved by over 50 North Amercian manufacturers of boilers, water heaters and furnaces
Suitable for natural gas, propane and fuel-oil condensing and non-condensing (flue temp. below 248°F) appliances
All parts (pipe, fittings, etc. - both black and grey) are UV resistant and suitable for indoor or outdoor installation
Requires no primer/glue and does not leach chloride like PVC & CPVC
Costs less and is faster and easier to install than stainless steel venting, no special tools needed, zero clearance to combustibles
Industry-leading 2mm wall thickness
Built-in gasket allows for adhesive-free installation which can be adjusted at any time
May be installed through a wall, chimney, chase or between joists
Lightweight, requires minimal support
Made in the USA from environmentally-friendly PolyPropylene (PP).