Automatic DIY Plant Smart Watering Kit pump for Arduino Electronic+Oled Screen

Description

Automatic DIY Plant Smart Watering Kit pump for Arduino Electronic+Oled Screen
Description
The Smart Watering Kit allows to provide all your own smart plant monitoring system with ease of use and unlimited options! The kit include pump, soil moisture sensors, water switch to redirect the water to up to 4 plants and pipes for the water to go through.
When you power the board after uploading the program we attached in the wiki, the board using the 4 soil moisture sensors to dentermine the soil level in the plant.The board will send command to the switch to open specific channel for specific plant that needs water currently (up to 4 plants at once).
Afterwards, the board will send command to turn on the pump and suck water into the switch, the switch will separate the stream and will give just enough water for your plants. Then it will close the pump and the switch and continue to check when does your plant needs water. It’s possible to make it even smarter with light sensor so for example the plant will not be watered at night or with rain sensor so if it's raining, don't water the plant as well. The smart watering kit is based on Crowduino Smart pump shield which is included as well with the kit.
The Smart Pump Shield is a brand new one-of-a-kind shield that allows to build projects with ease and elimate the need of jumpers, breadboards, mess and complexity. The smart pump shield, orignally developed for smart watering kit allows to connect multiple sensors including humidity sensor, light sensor, rain sensor and soil moiusture sensors. it provides 5 relays that can be controlled seperately by pins or by integrating the interfaces. 4 relays can control 4 channels water switch directly and the 5th relay can control a pump, all by crowduino
interfaces for ease of use and less complexity. The board also provides 12v input that split between the board and the modules, providing the modules 5v input, that eliminates the need of another seperated power adapters.
The shield can be used for versious projects including but not limited to smart watering system, smart home, vending and drinking machine, cocktail mixer and so on.
Features
Eliminates the need of messy jumpers and breadboards, connect all sensors and modules with ease!
Control the relays both with Crowduino interfaces and with normal ones, the board is not limited to crowduino only.
Power the board with single 12V power supply, no need seperate power supply for arduino.
6 interfaces for sensors, one interface for water switch and one interface for motor or pump.
on-board power switch to control the power.
Specifications
Weight: 900g
Size of the box: 25cm x 19cm x 5.7cm
Length of water pipe: 5m.
Length of 3 pin crowtail cable: 50cm.
Package list
Crowtail- soil moisture sensors x 4
Smart Pump Board with Screen x 1
Five-way pipe x 1
DC 12V adapter x 1
DC12V Four-Way Valve x 1
Water pump x1
50cm 4 pin crowatail cable x4