-40%
QUIKPRODUCTS 4 OZ 'QUIKINJECTOR' OIL/DYE INJECTOR QT2511
$ 33.26
- Description
- Size Guide
Description
QUIKPRODUCTS4 OZ
ADDITIVE INJECTION TOOL
QT2511
Anytime a liquid product specifies that it needs to be introduced into an operating system QwikInjector
®
can be used as the injection medium. QwikShot
®
Refrigerant and Oil Treatment, dyes, and oil additives are all common items that require an injection tool to use. Our injection tool is intentionally sized for very small doses so that customers won't accidentally add non-condensables into a system.
Unscrew Qwik
Injector
® top and fill with liquid additive, such as Qwik
Shot
.
*Fill completely to ensure air does not get trapped in vessel
Connect the Qwik
Injector
® as Shown in the Illustrations Below.
It is desirable to have liquid overflow over the edges. The overflow indicates that there is no excess air within the Injector.
Connect to the
low side
of the operating system
FIRST
.
Connect to the
high side
of the operating system
LAST
.
Open the valve on the manifold. The high side pressure will push the liquid into the low side of the system.
CAUTIONS
Maximum Working Pressure is 800psig.
Never leave Qwik
Injector
® connected to the hoses. After use, always disconnect and disassemble.
Depress the valve core to relieve pressure prior to unscrewing cap.
Store the Qwik
Injector
® with the cap loose to prevent thread binding and pressure build-up.