-40%
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18
Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18

Sig P226 - P228 - P229 9MM compensator 1/2 X 28 RHT thread Range18

$ 52.8

Availability: 77 in stock
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Model: Sig Sauer P226 P228 P229
  • Country/Region of Manufacture: United States
  • Brand: Range18
  • MPN: Does Not Apply

    Description

    New Sig P226 - P228 -P229 9MM compensator 1/2 X 28 RHT thread fits the Silenceco  Sig barrel. Requires changing the recoil spring to an 11 LBS spring. If heavier loads are going to be fired it will require changing spring weight to adjust for the recoil. this listing is for the  Range18 Comp only.
    The compensator has been designed for the Silenceco  SIG threaded barrel.
    recommended to be installed by a gun smith.
    100% US Made Anodized Black Glock  9MM   Range18  Compensator.
    These finely designed and crafted Compensators are CNC machined out of one piece solid billet aluminum. The Range18 Compensators are 100% US made.
    The Range18 Compensator was designed to add to the look and performance of the SIG P226 firearm.  The Range18 Compensator comes Anodized in a flat Black finish.    This Range18 Compensator was designed for the Sig P226.   The Compensator  redirects gas reducing felt recoil, this redirection of gas vertically provides a genuine reduction in muzzle rise. The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots. The Range18 Compensator was designed with a set screw to prevent it from rotating on the barrel after installation. The Range18 Comepsator was designed to give the appearance that it is a factory part. The Range18 Compensator maintains the same profile as the Sig P226 Slide giving it a clean installed look along with the added performance.