SNAP ON IM1800L 1" DRIVE EXTENDED ANVIL IMPACT WRENCH A FRESHLY REBUILT TOOL

Description

Offered for sale herein is a fully restored and rebuilt Snap on IM1800L, 1" drive impact wrench with original side handle. This tool was bought as a used working impact wrench needing restoration repairs. I performed the complete teardown, inspection, made necessary parts replacement and repaired this tool to like new performance. This tool is Snap on Test Center rated for Skidmore testing of 1200 foot pounds of reverse tool torque. This number is typically conservative as it is Snap On catalogue spec sheet rated to hit 1800 maximum foot pounds (with high volume air fittings and air pressure between 100 to 120 psi on full open throttle operation). This tool has excellent throttle valve operation.
Snap On no longer supports this tool with service center repairs. I had no problem obtaining the wearing parts needed to tune up this tool. The polyurethane throttle valve balls are now obsolete. I am sourcing suitable replacement part options for this that will work with perfect fitment and last 7 to 10 years in heavy duty service. With this deal I also provide (2) extra 1" anvil retaining ring kits. I am also going to make an extra throttle valve repair kit for emergency field repairs so that you do not need to take the tool to a professional technician for throttle valve leak repairs when or if they should occur. Those 2 little additions to this deal will make for a solid and dependable tool that easily responded to the restoration I performed on it. The forward and reverse valve spool was removed, polished and new o'rings were installed for smooth reliable operation. This tool is both metric and fractional in the parts that are designed for it by Snap On. Dirty and wet air will be the death any Snap On air wrench. Daily oiling and or an inline oiling and filtration system will give many excellent years of forward service life to this tool.
*ebay enables my customers to have phone conversations with me if there are questions or concerns about an item I have listed for sale.  Feel free to use it if you need to know something about this item or something else related to what I have listed in my ebay store.
Special noteworthy Conditions:
I do recommend using 2 or 3 wraps of plumbers teflon tape on the last few threads (but not on the first 2 threads) of your male threaded shop air fitting to avoid bottoming into the inlet bushing threads with your shop air fitting to capture a proper air seal.  Teflon tape can shred and clog the bushing debris screen when not carefully used. Avoid using air fittings with less than 3/8" ID and make sure to obtain 90 to 120 psi air pressure to the tool with air hoses that are not cracked internally.  If you have any performance problems with any air tool always check the air inlet bushing debris screen first to make sure that the tool is not being starved for air supply.
I don't specifically offer a warranty on my tools sold on ebay.  That is because there are some shops with wet and dirty air, deteriorating air hoses or shop air piping that will destroy tools.  There are also some people who push the limits of their tools much harder than what a manufacturer recommends when they should be using a larger drive or heavier duty tool.  If you do have a tool performance issue that is my fault I recognize that you will need my support to make corrective repairs.  I have not had customer complaints from ebay store sales with my rebuilds or new tools sold.  I make every effort to correct any existing tool issues and verify my work when I rebuild a pneumatic tool.  I have sold repaired air tools overseas on ebay without any issues.
I ship this tool
weighing 14 pounds using UPS or FedEx with an ebay label and tracking to the lower 48 states only. I will cancel your order if you indicate a postal mail box address.